SOLA BRUSH 400MM SOLAR CLEANING BRUSH
The Sola-Brush 400mm was specifically developed for PV and solar panel cleaning. The optimal hardness of the bristles and high pressure nozzle ensures the best possible removal of dirt and moss in the frame area of the solar panel. The nozzles spray directly onto the soiled surface. Ergonomic operating and optimal application of the brush are individually adjusted using the adjustable angle joint. It is the perfect complement to the Sola-Tecs C solar cleaning brush and can be replaced in just a few seconds. This brush is also able to reach difficult areas.
Application Areas:
- Solar Panel Cleaning
- Window cleaning
Compatible With:
- Kränzle HD 7/122 TS
- Kränzle HD 11/130 TS
|
- Operating pressure 210 bar
- Temperature 60 °C
- Width 400mm
- Weight 1.5 kg
- Connection M22 x 1,5 AG
| | | |
ST0200813 | | |
| R6,210.00 | |
SOLAR SWIVEL JOINT
The SOLA-TECS C can be easily controlled using a swivel joint. When the rod is turned, the direction of the brush also changes as a result. This has the advantage of being transported laterally from module to module, without a great amount of effort. Therefore, maintenance walkways can be bypassed without any problems.
When cleaning the edge of the roof, there is always a danger that the brush goes over the edge of the roof and can only be pulled back up again with great difficulty. With the brush’s slanted position you can now safely clean whilst overlapping.
|
- Operating pressure 140 bar
- Temperature 60 °C
- Connection M 22x1,5 AG
- Outlet M 22x1,5 IG
| | | |
ST0200815 | | |
| R8,625.00 | |
SOLAR SLIDE BRUSH SET (TELESCOPIC POLE)
In this regard, we offer slide brushes for SOLA-LITE telescopic lances. They come in a pack of three. These are put on telescopic lances to protect the PV modules underneath in the event of large reaches (and a rod that has slightly sagged).
|
- Weight 500g
- Length x Width 150 x 45 mm
- Material Plastic
| | | |
ST0200828 | | |
| R2,530.00 | |
SOLAR ADAPTER SET - HIFLO
If you already got a HIFLO pole system and would like to use the SOLA-TECS C this adapter allows seamless adaption between the two.
Adapter for UNGER - HiFlo Advance / CarbonTec Telescopic. Plug-in diameter: 22 mm
|
- Weight 250g
- Connection M22 IG / G 1/8" AG
|
- SOLAR ADAPTER SET - HIFLO X1
- high-pressure hose DN 6, 25 m X1
| | |
ST0200847 | | |
| R10,925.00 | |
SOLAR PANEL BRUSH SPLASH GUARD - C1000
The solar panel brush splash guard - C1000 ensures that you also stay dry when cleaning and the water is targeted at washing away loosened dirt. Optimized splash guard with easy quick-snap-fastening.
|
| | | |
ST0200870 | | |
| R6,900.00 | |
| | | | |
TV6100220 | | |
| R3,415.50 | |
TECNOVAP MICROFIBER CLOTH - 22cm
22cm microfiber cloth for the Tecnovap July Mop, steaming accessory used at 6 bar.
| | | | |
TV7000268 | | |
| R80.50 | |
HIGH PRESSURE HOSE + CLEAR COVER - 25M
25m long double braided high pressure hose 5/16 with a clear cover. Clear cover allows for covering the hose and protecting the high pressure hose from scuffing on rough surfaces, this is a lighter option then a garden hose. Fitted with M22 female screw on connectors on each end to connect to your high pressure cleaner and to your high pressure gun.
NOTE: Colour of the hose may vary from time to time: blue, grey or black.
|
- Length 25m
- Fittings M22 female
- Diameter 5/16
| | | |
HOSE25C | | |
| R5,244.00 | |
KRÄNZLE 3250 DBL PUMP MOBILE COLD WATER HIGH PRESSURE CLEANER
The Kränzle 3250 double pump is a mobile cold water high pressure cleaner operating at a powerful 250 bar and water output of 26L.
Features and Benefits:
- Sturdy stainless steel mobile frame
- Water tank with low level cut out
- Current overload protection
- Shock absorbing buffers
- Brass pump head
- Ceramic coated stainless steel pump piston
Continuously adjustable pressure control
- Dry run safety
- Total-stop system with delayed motor cut-out
Application Areas:
- Industrial cleaning of large machinery and equipment
- Removal of ceramic mould after the casting of aluminium components used in the motor industry.
|
- Operating pressure 250 bar
- Water output 26 l/min
- Admissible overpressure 270 bar
- Motor speed 1400 r.p.m
- Connection 400V
- Power intake 2 x 5.5kW
- Power supply cable 5m
- Dimensions 440mm | 200mm | 330mm
- Weight 23kg
|
- High pressure hose 10m
- Trigger gun with safety catch Starlet 3 | 12500
- Stainless steel lance - flat-jet nozzle 1000mm 05 nozzle
- Lance with Dirtkiller 1000mm Optional
| ![Kranzle]()
| |
M3250DBLM | | |
| R131,100.00 | |
| | | | |
MOS33.DGG | | |
| | |
| | | | |
ST0201774 | | |
| R5,060.00 | |
SOLAR TRANSPORT BAG FOR 1.8M VCMO MODULAR POLES
The solar transport bag allows the user to safely store the 1.8m modular poles and to be organized when moving from one location to the next.
|
- Volume 8 modular poles
- Length / Width 2,0 m / 30 cm
- Weight 500g
| | | |
ST0500836 | | |
| R1,035.00 | |
SOLAR HIGH PRESSURE HOSE 25M
With our high-pressure hose you can extend the radius of action or also clean the PV system using the hose. (incl. hose connector)
|
- Max. operating pressure 210 bar
- Temperature 150° C
- Length 25m
- Diameter DN 8
- Connection M22 x 1,5 IG
- Outlet M22 x 1,5 IG
| | | |
ST0500837 | | |
| R5,060.00 | |
The Tecnovap Tosca Evo Water 2.4kW steam cleaner with a stainless steel boiler, able to deliver dry-saturated steam at 151°C. The ergonomic structure, the fully electric operation and their small size enable to use them in any domestic environment.
Application Areas:
- Walls
- Floors
- Upholstery
- Showers
- Bathrooms
- Grout lines
- Ovens
- Windows
| Steam Cleaner
- Boiler Stainless steel AISI 304
- Body Varnished steel PO4
- Power supply 230V
- Boiler output 2,4 kW
- Maximum output 2,4 kW
- Boiler volume 4 litre
- Operating pressure 4 bar
- Water tank 3 litre
- Steam production 64 g/min
- Steam temp. 151 ° C
- Weight. 14 kg
- Cable 5 m
- Dimensions 53 x 40 x 52cm
| | 
| |
TV0210351V1 | | |
| R21,850.00 | |
KRÄNZLE STORM VACUUM CLEANER WET AND DRY 15L
The Kränzle Storm Vacuum Cleaner 15 litre capacity has a wet and dry vacuuming function for application areas of contractors or for commercial use where water is often needed to be vacuumed. A removable vacuum bag filter is only needed when dust vacuum cleaning is taking place, however, when a wet pickup of the vacuum cleaner is being done the vacuum filter bag should be removed.
View the full range of vacuum cleaners.
|
- Capacity 15L
- Power 1000W
- Water lift 210 mbar
- Tank diameter 34.5cm
- Air flow rate 48 L/S
- Cooling mode Air circulation
- Tooling size 36mm
- Hose length 2.5m
- Power cord 7m
- Motor stage Two stage
|
- Short connector x1
- Long connector x1
- Hose x1
- Steel pipe set x1
- Carpet combo x1
- Wet pick-up x1
- Crevice tool x1
- Round brush x1
- Upholstery brush x1
- Kranzle Storm Vacuum Cleaner 15L wet/dry x1
| 
| |
VKS15 | | |
| R3,105.00 | |
TECNOVAP RADAMES 4M HOSE 6 BAR
The Tecnovap radames 4m hose for operating pressure of 6 bar, installed with steam indicators, vacuum indicator, steam ready indicator, detergent indicator, overheated water indicator with functionalities for overheated water injection button, detergent injection button and a vacuum button. Allowing for steaming and a vacuuming function for the steam cleaner.
Compatible With:
- Steam Box Vac Mini
- Carmen Plus
- Carmen Mini
- Steam tech
- Junior Star Max
- Baby Eco
- Aida Baby
|
| | | |
TVRD04A04 | | |
| R6,095.00 | |
TECNOVAP RADAMES BABY WINDOW CLEANER L.250
Tecnovap radames window cleaner tooling to connect to the Radames tooling only allowing for steam cleaning windows with a cleaning width of 250mm.
| | | | |
TV5106063 | | |
| R1,897.50 | |
TECNOVAP STAR ACCESSORIES KIT - 6 BAR
Steam and vacuum cleaner accessories for the use at 6 bar.
Compatible With:
- Steam box mini
- Steam tech
- Junior star max
- Carmen plus
- Aida baby
- Carmen mini
- Baby Eco
- Carmen S
| |
- Extension tubes 480mm X2
- Floor tool 300mm
- Squeegee insert 300mm
- Carpet insert 300mm
- Brush insert 300mm
- Window cleaner yes
- Vacuum nozzle yes
- Steam lance yes
- Floor tool 145mm
- Squeegee insert 1456
- Brush insert 145mm
- Nylon brush 28mm
| | |
TVKSGD00V2 | | |
| R10,005.00 | |
KRÄNZLE BOILER CLEANING SET 64/70
The Kränzle boiler cleaning set with Hydro-head and pre-rinsing nozzles. The boiler cleaning equipment allows for one-man operation and guarantees a very high grade of cleanliness without doing any damage to the boiler tubes.
Please note: Soot blowers do not clean the fireside of the boiler. They only remove scale and soot from the second pass tube plate and tube ends.
Features:
- One-man operation without physical strain.
- Minimal noise
- No dust, this eliminates a huge health hazard.
- Reduction of cleaning time by up to 70%
- Low purchase price versus return.
- Low maintenance costs.
- The cleaning kit also provides the customer with our rotating nozzle lance which is very effective in cleaning flues, back and front tube plates.
Equipment Required:
- Kränle Quadro 800 cold water high pressure cleaner
- Boiler cleaning kit with hydro head and pre-rinsing nozzles
- The foot valve connected to the machine allows hands-free activation of the unit
- Additional high pressure hose to feed the pre-rinsing nozzles and hydro head into the boiler tube
- Sandblasting kit
| | | | |
X-BC00A | | |
| R21,735.00 | |
| | | | |
X-BC00E | | |
| R1,380.00 | |
KRÄNZLE ELECTRA 24KW 799 WALL MOUNTED HOT WATER HIGH PRESSURE CLEANER
The Kränzle Electra 24kW with a Kränzle 799 high pressure pump is available in a wall-mounted version hot water high pressure cleaner, with the heating ability of 24kW and with pressure ratings between 30 - 180 bar supplying high pressure hot water at temperatures from 60°C. This high pressure cleaner is also equipped with D12 fittings, allowing the user to have quick coupling to your accessories and your gun.
As one finds with fuel-heated machines, there are no fumes which makes the Electra especially suited for indoor use, in food preparation plants, wine cellars and where contamination of product or staff is sensitive.
The wall-mounted version is the preferred option in food factories and plants as it eliminates the need to move machines and hoses across the production floor. This is an important benefit with regards to occupational health and safety and the lockable cabinet eliminates potential tampering with controls and settings.
Features and Benefits:
- Water tank with a low level cut out
- Current overload protection
- Shock-absorbing buffers
- Brass pump head
- Ceramic-coated stainless steel pump pistons
- Continuously adjustable pressure control
- Dry-run safety
- Total-stop system with delayed motor cut-out
|
- Operating pressure 180 bar
- Water output 10 l/min
- Admissable overpressure 200 bar
- Motor speed 1400 r.p.m
- Connection 400V
- Power intake 5.5kW
- Heating elements 24kW
- Max. temperature on exit 60 ℃
- Dimensions 1200mm |800mm | 600mm
- Weight 104kg
|
- Hose reel Optional
- High pressure hose 10m
- Trigger gun with safety catch Starlet 3 | 12500
- Stainless steel lance - flat-jet nozzle 03 nozzle
- Lance with Turbokiller Optional
| ![]()
| |
ELE24 | | |
| R80,500.00 | |
KRÄNZLE ELECTRA 24KW 799 MOBILE HOT WATER HIGH PRESSURE CLEANER
The Kränzle Electra 24kW with a Kränzle 799 high pressure pump is available in a mobile version hot water high pressure cleaner, with the heating ability of 24kW with pressure ratings between 30 - 180 bar supplying high pressure hot water at temperatures from 60°C.
As one finds with fuel-heated machines, there are no fumes which makes the Electra especially suited for indoor use, in food preparation plants, wine cellars and where contamination of product or staff is sensitive.
The wall-mounted version is the preferred option in food factories and plants as it eliminates the need to move machines and hoses across the production floor. This is an important benefit with regards to occupational health and safety and the lockable cabinet eliminates potential tampering with controls and settings.
Features and Benefits:
- Water tank with a low level cut out
- Current overload protection
- Shock-absorbing buffers
- Brass pump head
- Ceramic-coated stainless steel pump pistons
- Continuously adjustable pressure control
- Dry-run safety
- Total-stop system with delayed motor cut-out
|
- Operating pressure 180 bar
- Water output 10 l/min
- Admissable overpressure 200 bar
- Motor speed 1400 r.p.m
- Connection 400V
- Power intake 5.5kW
- Heating elements 24kW
- Max. temperature on exit 60 ℃
- Dimensions 375mm | 360mm | 900mm
- Weight 39kg
|
- Hose reel Optional
- High pressure hose 10m
- Trigger gun with safety catch Starlet 3 | 12500
- Stainless steel lance - flat-jet nozzle 03 nozzle
- Lance with Turbokiller Optional
| 
| |
ELE24M | | |
| R90,850.00 | |
KRÄNZLE RETRACTABLE HOSE REEL FOR 20M HOSE
The Kränle retractable hose reel for a 20m hose, is made from stainless steel, auto sprung loaded.
Features and Benefits:
- Stainless steel
- Automatic spring return
- Drive spring made of spring band steel with highest durability
- Maintenance free drum bearing
- Angular swivel joint with stainless steel axles
- With 8-fold lockable detent position per rotation
- With threaded hose connection.
PLEASE NOTE: No hose or swivel bracket included. Swivel for retractable hose reel: 41260.1
|
- Length 20m
- Material Stainless steel
| | | |
41259.7 | | |
| R25,185.00 | |
TECNOVAP STEAM BOX PRO 3.6KW - 14.4KW
The Tecnovap Steam Box Pro is an industrial steam cleaner with stainless steel body and boiler, unlimited steam autonomy thanks to the automatic refilling system with either an internal water tank or directly with a water mains connection. Available functions: detergent injection, overheated water injection.
Features and Benefits:
- Water tank - 14 litres
- Detergent tank - 14 litres
- Multipower switch regulator
- Overheated water injection
- Detergent injection
Application Area:
- Food industry
- Mechanical and automotive industry
- Hospital industry
- Transport industry
|
- Boiler Stainless steel AISI 304 - with interchangeable heating element
- Body Stainless steel AISI 304 BA
- Power supply 400V
- Boiler output 3,6 - 7,2 - 10,8 - 14,4
- Maximum output 3,75 - 7,35 - 10,95 - 14,55
- Boiler volume 7,3 l
- Operating pressure 10 bar
- Water tank 14q litre
- Steam production 97 - 194 - 291 - 388 g/min
- Steam temp. 183 ° C
- Detergent temp. 90 - 160° C
- Weight. 60 kg
- Cable 8 m
- Dimensions 115 x 65 x 125cm
| | 
| |
TV4H0X010 | | |
| R190,900.00 | |
| | | | |
00085 | | |
| R1,196.00 | |
- “New-Look” finish for a sleek, polished look
- Long-lasting durability for weeks of protection
- Hydrophobic properties to repel water and dirt
- Easy and safe application for hassle-free use
- Available in 1L, 5L, and 25L sizes
| | | | |
NERTA-TYRE-BUMPER | | |
| R1,196.00 | |
KRÄNZLE ELECTRA 48KW 3250 PUMP WALL MOUNTED HOT WATER HIGH PRESSURE CLEANER
The Kränzle Electra 48kW with a Kränzle 3250 high pressure pump is available in a wall-mounted version hot water high pressure cleaner, with the heating ability of 48kW and with pressure ratings between 30 - 200 bar supplying high pressure hot water at temperatures from 80°C.
As one finds with fuel-heated machines, there are no fumes which makes the Electra especially suited for indoor use, in food preparation plants, wine cellars and where contamination of product or staff is sensitive.
The wall-mounted version is the preferred option in food factories and plants as it eliminates the need to move machines and hoses across the production floor. This is an important benefit with regards to occupational health and safety and the lockable cabinet eliminates potential tampering with controls and settings.
Features and Benefits:
- Water tank with a low level cut out
- Current overload protection
- Shock-absorbing buffers
- Brass pump head
- Ceramic-coated stainless steel pump pistons
- Continuously adjustable pressure control
- Dry-run safety
- Total-stop system with delayed motor cut-out
Enquire For Product Demonstration:
Contact us directly to enquire about a demo or find your nearest Kranzle Dealer.
|
- Operating pressure 200 bar
- Water output 13 l/min
- Admissable overpressure 220 bar
- Motor speed 1400 r.p.m
- Connection 400V
- Power intake 7.5kW
- Heating elements 48kW
- Max. temperature on exit 80 ℃
- Dimensions 1200mm | 800mm | 600mm
- Weight 112kg
|
- Hose reel Optional
- High pressure hose 10m
- Trigger gun with safety catch Starlet 3 | 12500
- Stainless steel lance - flat-jet nozzle 045 nozzle
- Lance with Turbokiller Optional
| 
| |
ELE007 | | |
| R123,050.00 | |
KRÄNZLE ELECTRA 24KW MOBILE HOT WATER HIGH PRESSURE CLEANER
The Kränzle Electra 36kW with a Kränzle 3250 high pressure pump is available in a mobile version hot water high pressure cleaner, with the heating ability of 36kW and with pressure ratings between 30 - 200 bar supplying high pressure hot water at temperatures from 60°C.
As one finds with fuel-heated machines, there are no fumes which makes the Electra especially suited for indoor use, in food preparation plants, wine cellars and where contamination of product or staff is sensitive.
The wall-mounted version is the preferred option in food factories and plants as it eliminates the need to move machines and hoses across the production floor. This is an important benefit with regards to occupational health and safety and the lockable cabinet eliminates potential tampering with controls and settings.
Features and Benefits:
- Water tank with a low level cut out
- Current overload protection
- Shock-absorbing buffers
- Brass pump head
- Ceramic-coated stainless steel pump pistons
- Continuously adjustable pressure control
- Dry-run safety
- Total-stop system with delayed motor cut-out
Enquire For Product Demonstration:
Contact us directly to enquire about a demo or find your nearest Kranzle Dealer.
|
- Operating pressure 200 bar
- Water output 13 l/min
- Admissable overpressure 220 bar
- Motor speed 1400 r.p.m
- Connection 400V
- Power intake 7.5kW
- Heating elements 24kW
- Max. temperature on exit 60 ℃
- Dimensions 375mm | 360mm | 900mm
- Weight 39kg
|
- Hose reel Optional
- High pressure hose 10m
- Trigger gun with safety catch Starlet 3 | 12500
- Stainless steel lance - flat-jet nozzle 045 nozzle
- Lance with Turbokiller Optional
| ![]()
| |
ELE003M | | |
| R98,900.00 | |
Industrial steam generator with stainless steel body and boiler, unlimited steam autonomy thanks to the automatic refilling system with either an internal water tank or directly with a water mains connection. Available functions: detergent injection, overheated water injection.
Features and Benefits:
- Water tank: 20l
- Detergent tank: 20l
- 10 Bar steam pressure
- Multipower switch regulator
- Overheated water injection
- Detergent injection
- Anti scratch rubber wheels
Application Areas:
- Food processing industry
- Factory machinery
- Conveyor systems
|
- Boiler Stainless steel AISI 304 - with interchangeable heating element
- Body Stainless steel AISI 304 BA
- Power supply 400V
- Boiler output 10,8 - 14,4 - 21,6 - 28,8 - 36
- Maximum output 11 - 14,6 - 21,8 - 29 - 36,2
- Boiler volume 11 l - 12 l - 13 l
- Operating pressure 10 bar
- Water tank 20 litre
- Steam production 291 - 388 - 582 - 776 - 970 g/min
- Steam temp. 183 ° C
- Detergent temp. 90 - 160° C
- Weight. 96 kg
- Cable 8 m
- Dimensions 115 x 65 x 125cm
| | 
|
|
TV5H0301M | | |
| R330,050.00 | |
High pressure foamer, up to 20 MPa. Adjustable external detergent suction. Brass or sst injector.Shockproof plastic handle. Net internal strainer.
| | | | |
25.1860.50 | | |
| R2,760.00 | |
KRÄNZLE STEAMER 36KW
The Kränzle Steamer 36kW designed for optimum performance in mediunm to large wineries and food processing plants.
Standard Equipment:
- Stainless steel frame and body
- Temperature indicator
- Overpressure safety
- Steam trap to remove water
- Low level control for incoming water
Application:
- Steaming of the bottling filling line
- Barrel or drum steaming after washing
- Assists in the hydration of new wine barrels
- Sanitizing tanks and removing tartrates
|
- Voltage 400V
- Amperage draw 54 A
- Plug 63 A
- Elements 4
- Min. water pressure 2.5 bar
- Max. water pressure 6 bar
- Steam supply 54 kg/hour
- Cable length 10m
|
- Steam hose 7m
- Barrel diffuser Yes
| 
| |
00235 | | |
| R121,900.00 | |
This foam-based aerosol cleaner is highly effective for cleaning and degreasing all types of glass, mirrors, and windows. Its powerful formula ensures a streak-free, crystal-clear finish on any surface.
- Effective on all glass surfaces, including mirrors and windows
- Foam-based for superior cleaning power
- Convenient 500ml spray can for easy application
| | | | |
00099 | | |
| R201.25 | |
| | | | |
JAEQ-1015 | | |
| R48.74 | |
| | | | |
TVRW12BT2 | | |
| R37,041.50 | |
| | | | |
TV7104005 | | |
| R9,924.50 | |
| | | | |
TV71071G2 | | |
| R2,403.50 | |
| | | | |
H0005 | | |
| R132.25 | |
| | | | |
00447 | | |
| R1,495.00 | |
KRANZLE TRUBOKILLER LANCE 1000MM - D12
The Kranzle turbokiller lance with a 1000mm length pipe and with the added benefit of a D12 quick connection fitting for effortless connection to your Kranzle gun. The turbokiller lances are very effective on insensitive surfaces, removing even the most stubborn stains without residue. It is most effective when high working pressure and large quantities of water are required.
Compatible With:
- Kranzle Starlet 2 Short Gun - D12 (12327.2)
- Kranzle Starlet 3 Short Gun - D12 (12500)
- Kranzle M2000 GUN - D12 - (12481)
- Kranzle M2000 Short Gun - (12492)
|
- Length 1000mm
- Nozzle size 04, 05, 07
- Inlet D12
- Material Stainless steel
| | | |
12430- | | |
| R4,025.00 | |
KRANZLE STANDARD LANCE 500MM - D12
The Kranzle standard lance with a length of 500mm with the added benefit of quick coupling D12 - allowing for an effortless connection to the D12 Kranzle guns.
Ideal for cleaning sensitive surfaces, allowing a sweeping effect of the dirt being cleaned.
Compatible With:
- Kranzle Starlet 2 Short Gun - D12 - ITEM CODE: 12327.2
- Kranzle Starlet 3 Short Gun - D12 - ITEM CODE: 12500
- Kranzle M2000 GUN - D12 - ITEM CODE: 12481
- Kranzle M2000 Short Gun - D12 - ITEM CODE: 12492
|
- Length 500mm
- Nozzle size 028, 03, 035, 04, 042, 045, 05, 055
- Spraying angle 20 or 25
- Inlet Quick-Release insert D12
- Material Stainless steel
| | | |
12435- | |
|
| R1,081.00 | |
