BARREL CLEANING

The Kränzle Barrel Cleaner has been developed with the assistance of experienced winemakers. It allows one-man operation and guarantees a very high grade of cleanliness without doing any damage to the barrels.

Cleaning is most effective when hot/cold water cycles are used and the cleaning time is usually between 3-4 minutes, with a water consumption of approximately 45 litres for a normal cycle.

When using the Kränzle Electra high pressure cleaner it is possible to use a cold/hot water cleaning cycle timing system that activates the functions of switching the motor and elements on a pre-set times by turning a key switch.

Various control features are also available that allow the switching on/off of the high pressure pump from a remote location.

The barrel cleaner has been developed to work together with the Kränzle Electra, Therm and Quadro range of equipment.

Per Page

7 Results

Filter Results
DescriptionSpecificationsIncluded InDownloadsVideos/ImagesItem number:QtyPrice

KRÄNZLE BARREL CLEANER STAINLESS STEEL WITH FRAME

The Kränzle Barrel Cleaner has been developed with the assistance of experienced winemakers. It allows one-man operation and guarantees a high grade of cleanliness without doing any damage to the barrels. Cleaning is most effective when hot/cold water cycles are used and the cleaning time is usually between 3 - 4 minutes, with a water consumption of approximately 45 litres for a normal cycle.

The Kränzle Barrel Cleaner has been developed to work together with the Kränzle Electra hot water high pressure cleaner, Therm and Quadro range of high pressure cleaners.

 00036
R49,450.00

KRÄNZLE 500L BARREL CLEANER ON FRAME

The Kränzle Barrel Cleaner has been developed with the assistance of experienced winemakers. It allows one-man operation and guarantees a high grade of cleanliness without doing any damage to the barrels. Cleaning is most effective when hot/cold water cycles are used and the cleaning time is usually between 3 - 4 minutes, with a water consumption of approximately 45 litres for a normal cycle.

The Kränzle Barrel Cleaner has been developed to work together with the Kränzle Electra hot water high pressure cleaner, Therm and Quadro range of high pressure cleaners.

 00167
R72,450.00

BARREL CLEANER BENT COMPLETE

The bent barrel cleaner is for cleaning of barrels while on the cradle (P00316 ) - the geared cleaning head with a 24V DC ensures operator safety. Requiring a 230V power supply.

Compatible With:
- All high pressure cleaners with M22 fitting.

 00095
R48,300.00

KRÄNZLE BARREL CLEANER STRAIGHT - HEAD ONLY

Kränzle barrel cleaner straight, supplied with gear head only and supplied with transformer and electrical box.

 00071
R37,950.00

STEAMER CRADLE AND DIFFUSER

A stainless steal steamer and diffuser head connects to the Kränzle Steamer to allow any steam condensation to drip out the bung hole - the barrel should be in the same position as when using the barrel cleaner.

 P00316
R12,535.00

KRÄNZLE TANK WARMER 18KW

The Kränle Tank Warmer is connected to the jackets or cooling plates of the tank and glycol or water is circulated and warmed to the set temperature. This process gradually warms the tank contents without disturbing the wine. The tank warmer greatly facilitates the task of reaching a suitable temperature to achieve malolactic fermentation in wine production as well as obtaining the correct temperature for bottling.

Features and Benefits:

  • Equipped with Geka fittings
  • Hose to connect to tank not included
  • Low pressure centrifugal pump
  • Standard unit (18KW) requires a 32 AMP supply


Please note: Do not need a neutral supply

  • Voltage  400V
  • Amperage draw  32 A
  • Plug  4/5 Pin 32 A
  • Elements 3 x 6kW
  • Cable length 9m
  • Possible fittings Geka / NW / Camlock

  • Fittings  Equipped with geka fittings
  • Hoses to connect to tank  Not included

Kranzle

 P00034
R55,200.00

KRÄNZLE TANK WARMER 24KW

The Kränle Tank Warmer is connected to the jackets or cooling plates of the tank and glycol or water is circulated and warmed to the set temperature. This process gradually warms the tank contents without disturbing the wine. The tank warmer greatly facilitates the task of reaching a suitable temperature to achieve malolactic fermentation in wine production as well as obtaining the correct temperature for bottling.

Features and Benefits:

  • Equipped with Geka fittings
  • Hose to connect to tank not included
  • Low pressure centrifugal pump
  • Standard unit (18KW) requires a 32 AMP supply

Please note: Do not need a neutral supply

  • Voltage  400V
  • Amperage draw  44 A
  • Plug  4/5 Pin 63 A
  • Elements 3 x 8kW
  • Cable length 9m
  • Possible fittings Geka / NW / Camlock

Kranzle

 P00036
R55,200.00
To top